Introduction
You may need to provide some extra security to your Kutty X 2 motor power wire before going out riding. This is a simple fix to perform!
You will need the following to do this:
1 x Zip Tie (small or large will work)
Snips or scissor to trim the end of the zip tie
Step 1
Move yourself to examine the non-drive side chainstay of the bike - the highlighted area in the first image.
Take a zip tie to attach the thick black wire coming from the motor to the frame.
Use that zip tie to cinch the motor power wire to the frame at the spot illustrated in the second and third attached images.
With the zip tie fully cinched tight snip off any excess length from the end of the zip tie.
You are now done and ready to go and ride!