Introduction
Removing the rear wheel on a bike with the XD Dual Drive Motor may look intimidating but it's not much tougher than removing a rear wheel on any other bike!
You will need the following tools to do this:
Juggernaut XD / XD Duo Tools
2 x 10mm Wrench
Alternatively one 10mm Wrench and one Ratcheting Wrench with a 10mm Socket head
Work Gloves
Important to not contaminate your rear brake rotor during the cleaning process!
2 x 10mm Wrench
Alternatively, you can use one 10mm Wrench and one 10mm Socket
Work Gloves
These will keep your hands from getting greasy and dirty and keep dirt and grime from accumulating on the bike
Juggernaut XD Eagle Tools
4mm Allen Key
T45 Head Screwdriver or Driver Head to use with a screwdriver
Juggernaut XD FS
Phillips Screwdriver
6mm Allen Key
5mm Allen Key
10mm Wrench