Introduction
Watch the following video for instructions on how to remove, and reinstall the Juggernaut XD Dual-Drive Motor!
You will need the following tools to do this:
Needlenose Pliers
Blue Loctite
Phillips Screwdriver
13mm Wrench
15mm Wrench
10mm Wrench
10mm Socket + Ratcheting Wrench
Crank Arm Puller
Metric Allen Key Set
8mm, 6mm, 5mm, 4mm, 3mm, 2.5mm
This is not an easy job - you should be moderately mechanically competent to perform it. We recommend you set aside at least half an hour for installation and a half hour for removal. Having a helper nearby for help can also make this easier!