Attaching Armageddon Light to RST Renegade Fork
Help Desk Support
If your bike has an RST Renegade front fork and you have added an Armageddon light to it this guide will cover the process of attaching the mount and headlight to the stock headlight mount position.
4mm Allen Key
12mm Wrench or Adjustable Wrench
M6x12 Bolt x 1
M8x20 Bolt x1
Armageddon light and mounting bracket
Locate the narrow M5 bolt - it should be attached to the rear side of the fork arch. Remove it using a 4mm Allen Key.
If the bolt is not attached to the fork it will be in the parts box that comes with the bike.
Attach the mounting plate to the fork arch. The side of the mounting plate with two stuck-in bolts will be on the bottom fork arch and the threads of the bolt will face inward on the fork arch.
If you are also installing the front fender on your bike attach the top fender tab in between the fork arch and the light mount
Note: you may receive the light with this mount already attached to it in which case you will not need to carry out the next steps.
Attach the Armageddon Light to the mount using the M8 bolt provided. Note that you may receive the light with the mount. Slide the bolt through the end of the mount on the Armageddon light through the mount previously installed.
Attach the nut to the back end of the bolt connecting the Armageddon Light to the mount. Tighten this with a 12mm Wrench or an adjustable wrench to secure it.
Your light should now be installed and you will be ready to ride!
If you are having trouble, please submit a support ticket using the same email you placed your under. Please note in the ticket your Biktrix order number, the trouble you are experiencing and include photos of the issue.