Some of the Armageddon lights have a mount designed to attach directly to a RST GUIDE fork in the same position as the stock headlight can be. This will show you how to attach the headlight to this point. You can tell if you have the fork mounted version as from above it will look like this:
and NOT like this:
- 10mm Wrench x 2
- Star washer x 2
- These parts will come along with the light
Remove the stock headlight if it is attached.
Take the bolt and one star washer. Put the nut on the bolt then insert it into the headlight mount as shown if it isn't already attached there
Insert the bolt through the fork arch and fender tab as pictured below.
Make sure the headlight is facing upwards - the tint on the light will be at the top of the light and the headlight mount will be orientated as so:
Put the remaining star washer then bolt on the threaded end of the bolt. Hand lighten these - then use the 10mm wrenches to fully tighten these up. You will use one wrench to hold the bolt head still and the second wrench to tighten the nut.
Your Armageddon light is now mounted and ready to light up your rides! If you are still needing to hook up the electronics consult the appropriate guide for your bike:
If you are having trouble, please submit a support ticket using the same email you placed your under. Please note in the ticket your Biktrix order number, the trouble you are experiencing and include photos of the issue.