Classic Duo Range Extender Plate Installation
Help Desk Support
This guide will cover how to install your range extender on a Classic Duo bike
Phillips Head Screwdriver
Remove the 4 circled screws with a Phillips head screwdriver
Note: If your bike did not come with any screws you will need a 10mm long screw with M5 threads and a flat tapered head - see the image below
Place the Range Extender Bracket so the 4 metal holes on it line up with the holes where you took screws out of in the previous step. Then put the screws into the holes by a few threads one by one. When all the screws are loosely threaded in tighten them up.
Open the cap located below the range extender bracket and expose the connecting port.
Insert the plug at the end of the range extender bracket into this port
Now put your range extender battery onto this plate and enjoy!
If you are having trouble, please submit a support ticket using the same email you placed your under. Please note in the ticket your Biktrix order number, the trouble you are experiencing and include photos of the issue.