Kutty LT - display manual Follow
Display/Controls Overview
Here is a video going over some features of this display.
Choosing the assist level
Use the "+" and "-" keys to increase and decrease pedal assist respectively. Pedal-assist can be changed on the go without stopping.
How to Turn on Headlight
- Hold "+" key
How to Change Units
- Within 5 seconds after startup, Hold Up and Down keys for 3 seconds
- Short press power button twice until units (km/h and km) are flashing
- Press up or down until desired units flash
- Hold Up and Down keys to exit
How to Reset Trip
- Within 5 seconds after startup, Hold Up and Down keys for 3 seconds
- Hold the power button to clear trip data
- Hold Up and Down keys to exit
How to change Max Speed
- Within 5 seconds after startup, Hold Up and Down keys for 3 seconds
- Press up or down until desired speed is shown
- Hold Up and Down keys to exit
Complete Manual is attached
Comments
2 comments
There is no attachment
The link is right under the display image above.
Please sign in to leave a comment.