Stunner LT: Debugging Follow
Problem: Power output on level 1 and 2 are too high
Solution: Change settings on display for P05 (set assist levels to 1-9), Set P11, P12, P14 as needed. Check Display Settings Link here for more info
---------------------------------------------------------------------------------------------------
Problem: Inconsistent Pedal Assist engagement.
Solutions:
1: Move magnet disc on right crank closer to sensor
2: Change advanced setting P11 from 3 up to 20 (Reduces Pedal assist sensitivity)
Change advanced setting P12 from 3 up to 1 (Reduces initial power output)
Display Settings Link here for more info
---------------------------------------------------------------------------------------------------
Problem: Bike will kick back in after hitting brakes
Solution: Firmware update on controller needed. Reach us at Support@biktrix.com and we will send you a replacement.
Comments
0 comments
Please sign in to leave a comment.