Skip to main content

Introduction

Quill Stems are found on some Stunner X and Stunner Step-Over/Step-Thru models. These can be adjusted after they are attached to the bike - follow these instructions for the procedure on adjusting them!

Step 1

  1. Loosen the two bolts circled
  2. Adjust the angle of the stem
  3. Tighten these two bolts back up

Step 2

  1. Loosen these two circled bolts slightly - just enough that you can rotate the handlebars.
  2. Adjust the angle of the handlebars to your desired position.
  3. Tighten the two bolts back up.