Juggernaut Hub Duo Range Extender Plate Installation
Help Desk Support
This guide will cover how to install your range extender on a Hub Duo bike
5mm Allen Key
Remove the 4 circled screws with a 5mm Allen Key
Note: If your bike did not come with any screws you will need a standard M5x10 Bolt for this hole
Place the Range Extender Bracket so the 4 metal holes on it line up with the holes where you took screws out of in the previous step. Then put the screws into the holes by a few threads one by one. When all the screws are loosely threaded in tighten them up.
Open the cap located below the range extender bracket and expose the connecting port.
Insert the plug at the end of the range extender bracket into this port - make sure the plug is properly lined up with the port before plugging this in.
Now put your range extender battery onto this plate and enjoy!
If you are having trouble, please submit a support ticket using the same email you placed your order under. Please note in the ticket your Biktrix order number, the trouble you are experiencing and include photos of the issue.