The bike in the videos may be different than yours, however, the assembly instructions are the same.
Your bike should now be ready to ride. If you are having any difficulties with this assembly, please submit a support ticket using the same email you placed your order under. Please note in the ticket your Biktrix order number, the trouble you are experiencing and include photos of the issue.
How to Install Handlebars
Remove the faceplate from the front side of the stem via 4 Allen key bolts
Place handlebar onto the stem and hold the faceplate
Carefully thread in one bolt by hand about 2 or 3 turns
Now start threading the other 3 bolts
In an X pattern gradually tighten the 4 bolts while making sure the top and bottom of the faceplate are evenly spaced